Nutri NInja and Nutri Bullet repair fix loud motor and save money! nutribullet nutrininja

Articles

Nutri NInja and Nutri Bullet repair fix loud motor and save money! nutribullet nutrininja


okay everyone thank you once again for
tuning into our youtube channel would appreciate it if you would hit that
subscribe button down below so you can continue following us here on youtube as
we do produce videos here and there to save you money and save you green so in
this case we’re gonna talk about something if you nutribullet or nutri
ninja owners might face and that is a screaming module so you will turn it on
and you hear a light screaming noise and you’re wondering it’s time to throw away
the whole system and get a new one a lot of times you might think it’s even your
base but it’s not it’s basically this part so this base is the one I’m
referring to not the actual motor so a lot of people think it’s the motor and
they’ll throw it away but what you want to look at is this little base here
where the blades are connected to and with this simple fix you’ll be able to
make it work like if it were brand new so what you’re
gonna do is gonna get some olive oil and you want to use olive oil because it’s
something you can consume you don’t want to put wd-40 in here and you basically
just want to put it all over the place here just like like you’re seeing me do
here and then just turn it over and do the same thing on the other side just
like so okay and and a lot of times you would try to move this and you can’t
it’s just like jammed in there really good it’s almost like it’s locked
once you’re done with that you want to put it inside one of these containers
and you want to just screw it in there and what that’s gonna do is it’s gonna
not let any air get into it for a little while while the olive oil in there sits
and then right around this side here you’re going to want to go ahead and
pour olive oil on it and you might have to pour some more all around it and it’s
just gonna seep in there now what you want to do is you want to leave that in
there overnight and as you as you see there I’m just letting it get all
around you see that and feel free to put more in there again put put the olive
oil in there let us sit overnight and we’re going to go ahead and let it sit
there for a little bit and come back okay folks once you let that sit
overnight I’d say at least eight hours eight to 10 hours overnight you can come
back the next day and remember how that blade was just locked in there you will
see you will see now that it just spins freely and what you’ll see is when
you’re running it on your actual motor that it’s gonna not scream like it used
to so you won’t hear that high-pitched sound that you were hearing before when
it was running and it’s basically because there’s ball bearings in there
and as it gets a little older you know you get dust and all kinds of particles
in there’s just gonna have a hard time turning but you can see now how easily
it turns and what you want to do after that you can see some of that olive oil
falling in there and you’ll see what you want to do after that is when you store
it is not stored like this or like this on your sink but rather just store it
sideways and you’ll get the most optimal performance out of it without having to
spend another I don’t know 70 80 90 100 dollars on a new system when all it
needed was just to have this taken care of again a lot of owners think that it’s
the actual motor and they’ll throw everything away when in reality the
reason why it’s making that high-pitched sound is because the ball bearings in
there just need to be lubricated simple as that so thank you very much for
watching if you like this video if it was helpful after you tried it out
please give me a thumbs up please subscribe to our Channel as we mentioned
before we appreciate your support thank you very much for watching

Leave a Reply

Your email address will not be published. Required fields are marked *